Metzler flush-mounted doorbell Magneto without engraving, stainless steel V2A anthracite RAL 7016, 6 mm, interchangeable magnetic plate

Metzler flush-mount doorbell with exchangeable plate

Model: Magneto

This modern flush-mount doorbell from the "Magneto" series gives your front entrance a stylish first impression with its elegant design.

Thanks to rust-free stainless steel and the additional coating in the trend colour RAL 7016, your doorbell is absolutely weather-resistant and still looks like new even after years of use. The use of a solid, 6 mm thick stainless steel plate gives the doorbell a particularly high-quality, substantial feel.

The Magneto series is characterised by exchangeable nameplates. These flush-mount doorbells also feature exchangeable plates with extremely strong magnetic hold. You can swap the plate at any time and, if you like, have a custom engraving laser-cut.

Thanks to the built-in LED push button, your visitors can spot the bell button from a distance, which is especially useful in the dark. For the ring illumination of the push button you can choose from different colours (white, blue, red, green, yellow, pink or no LED), as well as for the bell symbol (white, blue, red, green). You can easily connect the doorbell button to the existing doorbell wiring in your house.

Features:

• rust-free stainless steel V2A
• powder coating in anthracite RAL 7016
• 100% UV- and weather-resistant
• LED push button with different colour options
• laser engraving possible
• exchangeable replacement plate item number: 6326
• Metzler quality product

Dimensions (width x height x depth):

• 8.5 x 9 x 0.6 cm

Push button:

• rust-free stainless steel (V2A)
• diameter: Ø 19 mm
• installation depth: up to approx. 26 mm
• LED voltage: 6-24 V AC/DC
• service life: 1,000,000 cycles
• protection class: IP67 (dust-tight and protected against temporary immersion)
• 100% UV- and weather-resistant

Installation:

• Since the LED button is recessed into the wall, a sufficiently large hole must be present. LED button Ø 19 mm = installation depth up to approx. 26 mm depending on model
• 4 screw contacts
• Connection to 2 doorbell wires is possible.

Wiring:

• The connection is made to conventional doorbell wires. No additional wiring is needed for the LED lighting. A detailed wiring guide is included.

For installation you will need:

• Chime
• Transformer 6 V - 24 V
• LED button as normally-open contact